罗茨鼓风机无法运行的原因有哪些

罗茨鼓风机应用很广泛,但是罗茨鼓风机存在故障时, 不要使用，一般铸铁三叶罗茨风机进 气温度超过40摄氏度,三叶罗茨风机就会出现问题。下面小编要为大家介绍下导致罗茨鼓风机无法运行的四个原因。

Roots blower is widely used, but when roots blower has faults, do not use it. Generally, if the intake temperature of cast iron three blade roots blower exceeds 40 ℃, three blade roots blower will have problems. The following small series to introduce to you the four reasons for Roots blower can not run.

1、机械故障

1. Mechanical failure

存在故障时,不要使用,即便有轻微故障,有些客户风机存在故障,某些厂家要求客户继续运行使用,运行坏了之后重新采购新的,有些客户可能会遇到过,这种情况。

Don't use it when there is a fault. Even if there is a slight fault, some customers have a fan fault, and some manufacturers require customers to continue to use it. After the operation is broken, they purchase new ones. Some customers may encounter this situation.

2、输送气体有毒

2. The gas transported is poisonous

有毒的气体一般不会使用三叶罗茨风机进行输送 , 在即便是特殊密封,危险性也比较大。

Toxic gases are generally not transported by a three blade roots blower, and even in a special seal, it is more dangerous.

3、进气温度超过40度

3. The intake air temperature exceeds 40 ℃

一般铸铁三叶罗 茨风机进气温度超过40摄氏度,三叶罗茨风机就会出现问题,所以,进温度超过40摄氏度，一般三叶罗茨风机无法正常运转。

Generally, if the inlet temperature of cast iron three blade roots blower exceeds 40 ℃, the three blade roots blower will have problems. Therefore, if the inlet temperature exceeds 40 ℃, the general three blade roots blower cannot operate normally.

4、输送气体易燃易爆

4. The transported gas is flammable and explosive

输送气体易燃易爆需要三叶罗茨风机进行特殊处理,没有做过特殊处理的三叶罗茨风机禁止输送。

The inflammable and explosive gas to be transported needs special treatment of the three blade roots blower, and the three blade roots blower without special treatment is forbidden to transport.