公司新闻

当前位置:首页 > 新闻中心 > 公司新闻 >

怎样优化干燥过程中的气流

来源:https://www.sdqyjn.com/   日期:2020-09-18   浏览量:
TAG:山东制氮机,山东干燥机,山东螺杆鼓风机,山东空压机,山东自动排水器

  在工作的时候,通常空气会产生潮气并失去能量,因此,需要增加湿度,防止出现饱和,并产生一个整体的负的系统压力,其会有新鲜空气进入,为了保证整体正常流动,需要进行适当的优化空气。

When working, the air will generate moisture and lose energy. Therefore, it is necessary to increase the humidity to prevent saturation and produce a whole negative system pressure, which will have fresh air entering. In order to ensure the normal flow of the whole, the air needs to be optimized properly.

优化排气湿度。从干燥机中取出的空气越多,需要加热的新鲜空气就越多。通常,干燥装置可以去除过多的空气为了确保产品正确的去除水分,这可能是非常有效的干燥,但它可以增加能源的使用,以加热进入系统的新鲜空气。

   optimize exhaust humidity. The more air is removed from the dryer, the more fresh air needs to be heated. In general, the drying device can remove excessive air. In order to ensure that the product removes moisture correctly, this may be very effective drying, but it can increase the use of energy to heat the fresh air entering the system.

考虑一下你的新鲜空气来源。另一个考虑因素是新鲜空气进入干燥装置的来源,来自寒冷、室外气候的空气会对达到所需温度所需的热能产生很大的要求,考虑一下是否有可能从大楼里收集新鲜空气,如果由于室内的设备热量损失,这种空气会变暖,这可能是一种很好的能源回收和净节省手段。



f4596ac69b4c9c8d5e60b00fb05256d.jpg

   consider your source of fresh air. Another consideration is the source of fresh air entering the drying unit. The air from cold and outdoor climate will have a great demand on the heat energy required to reach the required temperature. Consider whether it is possible to collect fresh air from the building. If the air will be warm due to the heat loss of indoor equipment, it may be a good means of energy recovery and net saving 。

热回收系统。喷雾干燥机公司介绍适当的条件下,可能有可能将热回收系统和干燥装置结合起来,利用排气流中的剩余能量,实现这一点常用的方法之一是通过热交换器。

   heat recovery system. Under the appropriate conditions, it is possible for the spray dryer company to combine the heat recovery system with the drying device and utilize the residual energy in the exhaust stream to achieve this. One of the commonly used methods is through the heat exchanger.

有许多类型的热交换器,如空对空和空气对水,尽管所有系统的原理都是一样的,回收废气中的废热以提供更高的能量补充空气,正确的解决办法将取决于干燥环境,许多制造商可以建议哪种系统适合您的应用程序。

There are many types of heat exchangers, such as air to air and air to water, although the principle of all systems is the same, the correct solution will depend on the dry environment, and many manufacturers can recommend which system is suitable for your application.


上一篇:制氮机设备有哪些特点?
下一篇:空压机配件高温故障怎么办