公司新闻

当前位置:首页 > 新闻中心 > 公司新闻 >

空压机维修中缩短检修时间的技术方法

来源:https://www.sdqyjn.com/   日期:2020-10-26   浏览量:
TAG:山东制氮机,山东干燥机,山东螺杆鼓风机,山东空压机,山东自动排水器

在空压机的使用中,随着时间的推移,空压机都会出现一些故障,那么在空压机维修中有没有快读检修的方法呢?今天就给您介绍几个:

Enterprises in the use of air compressor, with the passage of time, the air compressor will appear some failures, so in the air compressor maintenance there is no quick read maintenance method? Today, I'd like to introduce some of them to you

一、应用网络技术安排修理计划,找出关键路线,并加以调整优化

1、 Apply network technology to arrange the repair plan, find out the key route, and adjust and optimize it

网络技术又称关键线路法,是一种计划管理方法。它是通过分析项目过程中哪个活动序列进度安排的总时差最少来预测项目工期。它用网络图表示各项工作之间的相互关系,找出控制工期的关键路线,以达到缩短工期、提供工效、降低成本的目的。

Network technology, also known as critical path method, is a planning management method. It predicts the project duration by analyzing which activity sequence has the least total time difference in the project process. It uses the network diagram to show the relationship between the various work, and finds out the key route to control the construction period, so as to shorten the construction period, provide the work efficiency and reduce the cost.


f93cd2ca79cc38245945c4fa68983bc.jpg

二、采用同步修理法

2、 Adopt synchronous repair method

将设备中易损件的使用寿命设备成按近,做到同次修理、同次更换。将生产过程中工艺上相互联系的若干台设备,安排在统一时间修理。

The service life of the vulnerable parts in the equipment shall be closed to achieve the same repair and replacement at the same time. Arrange the repair of several equipments which are interrelated with each other in the production process at the same time.

三、采用分步修理法

3、 Step by step repair method is adopted

有计划地分几次修理设备各相对独立部分,每次只修一部分、可利用节假日进行修理。

Repair the equipment in several times in a planned way. Each part of the equipment is repaired only one part at a time, which can be repaired on holidays.

四、采用冗余技术,包括采用备机、备用部件替换修理法

4、 Redundancy technology is adopted, including the replacement and repair method of standby machine and spare parts

这种方法又称储备技术,有时也称容灾备份技术,它是利用系统的并联模型来提高系统可靠性的一种手段。

This method is also called reserve technology, sometimes called disaster recovery backup technology. It is a means to improve the system reliability by using the parallel model of the system.

五、采用无维修设计或易维修设计

5、 Adopt no maintenance design or easy maintenance design

无维修设计是一种理想设计,即考虑维修达到“无停机时间”、“无维修费用”的可能性,以设计出不需要维修的设备。它要求从设计开始就要消除造成设备维修的原因,对于维修费用很高的设备尤为适用。

Maintenance free design is an ideal design, that is to consider the possibility of maintenance reaching "no downtime" and "no maintenance cost", so as to design the equipment without maintenance. It requires that the causes of equipment maintenance should be eliminated from the beginning of design, especially for equipment with high maintenance cost.

本期的精彩内容由山东空压机的小编整理所得,感谢大家的阅读,如果有什么不对的地方,欢迎到我们的官网:http://www.jfkyj.cn,给我们留言评论,我们将会给您一个满意的答复。

The highlights of this issue are compiled by the editor of Shandong air compressor. Thank you for your reading. If there is anything wrong, please visit our website: http://www.jfkyj.cn Leave us a comment and we will give you a satisfactory reply.


上一篇:自动排水器的工作原理及安装步骤
下一篇:制氮机分子吸附系统和其它吸附系统有什么不同 ?