行业新闻

当前位置:首页 > 新闻中心 > 行业新闻 >

山东空压机润滑油管堵塞的原因都有哪些呢?

来源:https://www.sdqyjn.com/   日期:2021-03-12   浏览量:
TAG:山东制氮机,山东干燥机,山东螺杆鼓风机,山东空压机,山东自动排水器

对于任何空压机来说,空压机专用油是空压机的生命源动力。是整个空压机工作运行中的必要保证。但是不免有很多客户在空压机运行中遇到油管堵塞问题。那么,山东空压机润滑油管堵塞的原因都有哪些呢?为防止其堵塞,在安装过程中,我们需要做好哪些防范措施呢?

For any air compressor, air compressor special oil is the life source power of air compressor. It is the necessary guarantee of the whole air compressor operation. But there are many customers in the air compressor operation encountered tubing blockage problem. So, what are the causes of Shandong air compressor lubricating oil pipe blockage? In order to prevent its blockage, what preventive measures should we take in the installation process?

在安装前一定要把油管洗干净。

Be sure to clean the oil pipe before installation.

20210312577874.jpg

油管短不够长的情况下,要是在接一块的话应装上活接头。

If the tubing is short and not long enough, a union should be installed.

弯管时用煨管工具冷弯或氧乙炔火焰加热煨弯,应注意防止煨扁或金属过热而变形。

When bending pipes, use pipe bending tools for cold bending or oxyacetylene flame for heating. Attention should be paid to prevent flat bending or deformation due to overheating of metal.

油管和注油器装配好后,应进行系统的强度试验,试验压力为操作压力的1.5倍,当发现有渗漏或破裂时,应予以修理或更换。

After the tubing and oiler are assembled, the strength test of the system shall be conducted, and the test pressure shall be 1.5 times of the operating pressure. When leakage or rupture is found, it shall be repaired or replaced.

注油器与填料函、气缸供油点接通前,应先将油器开动起来,在每一个供油点处检查来油情况和清洁程度,直到清洁以后,再正式连上接头。

Before connecting the oiler with the stuffing box and the oil supply point of the cylinder, start the oiler first, check the incoming oil condition and cleanliness at each oil supply point, and then formally connect the joint after cleaning.

很多小小的故障会引起大大的问题,但是只要我们做好良好的防范措施,很多不必要的麻烦也是可以避免的。

Many small failures will cause big problems, but as long as we take good preventive measures, many unnecessary troubles can be avoided.


上一篇:螺杆风机噪音大怎么办?
下一篇:不同行业制氮机有什么作用吗?