行业新闻

当前位置:首页 > 新闻中心 > 行业新闻 >

PSA制氮机出现喷灰现象该如何处理?

来源:https://www.sdqyjn.com/   日期:2021-03-18   浏览量:
TAG:山东制氮机,山东干燥机,山东螺杆鼓风机,山东空压机,山东自动排水器

制氮机喷灰现象,也被称之为碳分子筛粉化,这种情况的出现是由于碳分子筛压不严实或碳分子筛松动,造成制氮机喷粉冒黑烟,此时需要整个系统彻底更换碳分子筛。如果此时还是正常添加碳分子筛,就会出现碳分子筛不停地喷出,后果会越来越严重,整个氮气管道系统会有碳分子筛粉末。

The phenomenon of dusting in the nitrogen generator is also known as the pulverization of carbon molecular sieve. This phenomenon is caused by the loose pressure of carbon molecular sieve or the loose of carbon molecular sieve, which causes the black smoke of dusting in the nitrogen generator. At this time, the carbon molecular sieve in the whole system needs to be completely replaced. If the carbon molecular sieve is added normally at this time, the carbon molecular sieve will be continuously ejected, and the consequences will be more and more serious. The whole nitrogen pipeline system will have carbon molecular sieve powder.

20210318696192.jpg

制氮机使用过程中受到撞击或者设备移动等原因导致吸附塔结构性毛病如吸附塔管道脱焊,碳分子筛外流,碳分子筛松动而粉化。从消音器喷出来的物质一般会有小颗粒,咱们需要查看该颗粒是活性炭还是分子筛。

The structural defects of adsorption tower caused by impact or equipment movement during the use of nitrogen generator, such as desoldering of adsorption tower pipe, outflow of carbon molecular sieve, loosening and pulverization of carbon molecular sieve. The material ejected from the muffler usually has small particles. We need to check whether the particles are activated carbon or molecular sieve.

由于活性炭和分子筛都是黑色的固体颗粒,从色彩上很难分辨,可是他们的颗粒形状不同。假如喷出来的是活性炭,那么问题还不是很严重,咱们可以将活性炭过滤器拆下,去除里面的活性炭,查看活性炭底部丝网是否有破损,如有破损,更换新的不锈钢丝网,然后装回活性炭即可正常运转。

Because activated carbon and molecular sieve are black solid particles, it is difficult to distinguish from each other in color, but their particle shapes are different. If the activated carbon is sprayed out, then the problem is not very serious. We can remove the activated carbon from the activated carbon filter and check whether the screen at the bottom of the activated carbon is damaged. If it is damaged, replace it with a new stainless steel screen, and then replace it with activated carbon.

装填活性炭的时尽量将过滤器内装满,防止活性炭在气流作用下相互碰击产生粉尘。假如喷出来的是分子筛,那么处理起来就比较麻烦了,需要将设备运回工厂后进行大修。

When loading activated carbon, try to fill the filter to prevent the activated carbon from colliding with each other under the action of air flow to produce dust. If the jet is molecular sieve, then the treatment is more troublesome, and the equipment needs to be transported back to the factory for overhaul.

上一篇:不同行业制氮机有什么作用吗?
下一篇:消声器,压缩空气自动排水器的原理及种类。