行业新闻

当前位置:首页 > 新闻中心 > 行业新闻 >

冷冻式干燥机与吸附式干燥机的区别

来源:https://www.sdqyjn.com/   日期:2021-05-10   浏览量:
TAG:山东制氮机,山东干燥机,山东螺杆鼓风机,山东空压机,山东自动排水器

干燥机通过加热使物料中的湿分汽化逸出,以获得规定湿含量的固体物料。干燥的目的是为了满足物料使用或进一步加工的需要。

The dryer vaporizes the moisture in the material by heating, so as to obtain the solid material with specified moisture content. The purpose of drying is to meet the needs of material use or further processing.

在现代企业里,压缩空气的使用越来越普遍,常见的压缩空气干燥机主要有吸附式干燥机和冷冻式干燥机两种。

In modern enterprises, the use of compressed air is more and more common. The common compressed air dryers are adsorption dryer and freezing dryer.

冷冻式干燥机与吸附式干燥机的不同之处是什么呢?

What is the difference between freeze dryer and adsorption dryer?

1、工作原理上的不同

1. Differences in working principles

冷干机是根据冷冻除 湿原理,将来自上游的饱和压缩空气通过与冷媒的热交换冷 却到一定的温度,凝析出大量的液态水,经气液分离器分离后自动排出机外,从而达到除水干燥的目的。吸干机则是根据变压吸附的原理,将来自上游的饱和压缩空气在一定的压力下经过与干燥剂的接触,将绝大部分的水份吸附在干燥剂里,干燥空气进入下游工作,从而达到深 度干燥的目的。

According to the principle of freezing dehumidification, the chiller cools the saturated compressed air from upstream to a certain temperature through heat exchange with refrigerant, condenses out a large amount of liquid water, and automatically discharges it out of the chiller after separation by gas-liquid separator, so as to achieve the purpose of water removal and drying. Suction dryer is based on the principle of pressure swing adsorption, will come from the upstream saturated compressed air under a certain pressure through contact with the desiccant, the vast majority of moisture adsorption in the desiccant, dry air into the downstream work, so as to achieve the purpose of deep drying.

2、除水效果上的不同

2. The effect of water removal is different

冷干机因为受到其原理的制约,如果温度太低的话会出现结冰现象,所以其的温度通常在2~10℃。吸干机则因为无须通过温度

Because of its principle, if the temperature is too low, there will be icing phenomenon, so its temperature is usually 2 ~ 10 ℃. The drying machine does not need to pass through the temperature

变化,而干燥剂(氧化铝)则又可以进行深度干燥,所以通常其出口的温度可以达到-20℃以下,也就是说可以达到深度干燥。

Change, and the desiccant (alumina) can be deep drying, so usually its outlet temperature can reach below - 20 ℃, that is to say, deep drying can be achieved.

3、能量损耗上的不同

3. Differences in energy consumption

对于冷干机来说,因为要通过冷媒压缩作功方可达到冷 却的目的,所以在电源功率上会偏高。而吸干机因为只要通过电控箱对阀门进行控制而已,所以通常用电功率只有几十瓦左右,也就是说不会有什么电量上的损耗。

For the cold dryer, because the purpose of cooling can only be achieved through refrigerant compression, so the power supply will be high. As long as the valve is controlled by the electric control box, the power consumption of the suction dryer is usually only about tens of watts, that is to say, there will be no power loss.

4、气量损耗的不同

4. The difference of gas loss

因为冷干机是通过变温来达到除水的目的,水份又是通过自动排水器排出机外,所以没有气量的损耗。而吸干机则因为干燥剂在吸水饱和后需要再生,因些需要有12-15%左右的再生气损耗。

Because the cold dryer is to achieve the purpose of water removal by changing the temperature, and the water is discharged from the machine through the automatic drainer, so there is no loss of air volume. The dryer needs to be regenerated after water absorption saturation, so it needs about 12-15% regeneration gas loss.

5、故障率的不同

5. Different failure rates

因为冷干机的冷媒系统和空气系统包括电气部分都相对复杂,而吸干机则只有阀门因要频繁动作而具有故障可能,所以在通常情况下吸干机的故障率要低过冷干机。

Because the refrigerant system and air system of the dryer, including the electrical part, are relatively complex, and only the valve of the dryer has the possibility of failure due to frequent action, so in general, the failure rate of the dryer is lower than that of the supercooled dryer.

总的说来,吸干机无论在稳定性还是在效果上都要优于冷干机,只是因为要损耗一定量的再生气,所在我们一般要客户权衡利弊后作出选择。不过现在已有越来越多的厂家选择吸干机,

Generally speaking, the suction dryer is better than the cold dryer in terms of stability and effect, just because it needs to consume a certain amount of regeneration gas, so we usually ask customers to weigh the pros and cons before making a choice. However, now more and more manufacturers choose the suction dryer,


上一篇:实用 | 干燥机选型的重要性
下一篇:空压机在打地热井洗井中的应用