制氮机如何正确保养才能延长使用寿命

正确的制氮机保养知识是非常必要的，良好的操作习惯和定期的保养维护，能延长设备正常使用寿命，减少能耗，降低维修成本，更能有效避免突发性故障，大幅降低故障对生产带来的负面影响。下面清越带你一起了解制氮机保养的正确知识和方法。

The correct maintenance knowledge of nitrogen generator is very necessary. Good operating habits and regular maintenance can prolong the normal service life of the equipment, reduce energy consumption, reduce maintenance costs, and effectively avoid sudden failures and greatly reduce the negative impact of failures on production. The following Qingyue will take you to understand the correct knowledge and methods of nitrogen machine maintenance.

1、对空气处理环节的检测，冷干机的制冷效果怎么样，对管道滤芯定期更换（每六个月更换一次），使空气质量更好。

1. For the detection of air treatment links, how about the refrigeration effect of the cold dryer, and replace the pipe filter element regularly (every six months), so as to improve the air quality.

2、对制氮机活性炭进行更换（12个月更换一次），活性炭环节是除油的一个过程，能是空气中的油分降低，避免对制氮机碳分子筛污染中毒。

2. The activated carbon of nitrogen generator is replaced once every 12 months. The activated carbon link is a process of oil removal, which can reduce the oil content in the air and avoid the pollution and poisoning of carbon molecular sieve of nitrogen generator.

3、对制氮机氮气分析仪检测校准，p860系列氮气分析仪一般寿命为2-3年，寿命到期建议更换，避免对制氮机纯度的误判及对产品造成损失。

3. For the detection and calibration of nitrogen analyzer of nitrogen generator, the general service life of P860 series nitrogen analyzer is 2-3 years. It is recommended to replace it when the service life is expired, so as to avoid misjudgment of purity of nitrogen generator and loss of products.

山东制氮机

Shandong nitrogen generator

4、对电磁阀和气动阀进行检查，为确保设备正常运行，建议用户有备用。

4. Check the solenoid valve and pneumatic valve. In order to ensure the normal operation of the equipment, users are advised to have spare parts.

5、制氮机碳分子筛（5-6年更换一次）氮产率进行分析试验，确保氮产率满足客户的需求。进行保养时要根据客户的使用情况，对制氮机碳分子筛进行添加或更换。

5. Analyze and test the nitrogen yield of carbon molecular sieve (replaced every 5-6 years) to ensure that the nitrogen yield meets the needs of customers. During maintenance, the carbon molecular sieve of nitrogen generator should be added or replaced according to the use of customers.

保养的目的在于防止故障而非排除故障，保养远远低于维修成本，保养能避免不规则的故障，避免发生故障时对生产的影响，保养能保证能耗效率，保养能延长设备的正常使用寿命， 其综合效益是为广大用户大大降低其生产成本。

The purpose of maintenance is to prevent faults rather than eliminate them. Maintenance is far lower than the maintenance cost. Maintenance can avoid irregular faults and avoid the impact on production when faults occur. Maintenance can ensure energy consumption efficiency, and can extend the normal service life of equipment. Its comprehensive benefit is to greatly reduce the production cost for the majority of users.

相关标签：山东制氮机