山东干燥机处理专用颗粒通常会遇到什么问题

  在处理专用颗粒的时候，可能会出现时间不一致的情况，严重影响到正常的进度，还会导致各种问题，为了能保证终的质量，需要我们采取一些措施才可以，这样能解决很多状况。

In the processing of special particles, there may be time inconsistency, which will seriously affect the normal progress and lead to various problems. In order to ensure the final quality, we need to take some measures to solve many problems.

对于专用的颗粒，循环流化床干燥机非常适合，其产品通常是粒状载体材料，还有就是填充材料和活性成分。在生产过程中，颗粒载体筛选到一个狭窄的尺寸范围内直径，圆振动筛双层振动筛按照载体材料的排序，添加填料和活性成分，并批量进行专有的转换过程。

   circulating fluidized bed dryer is very suitable for special particles. Its products are usually granular carrier materials, as well as filling materials and active ingredients. In the production process, the particle carrier is selected to a narrow size range of diameter, and the circular vibrating screen, double-layer vibrating screen, according to the sequence of carrier materials, adds fillers and active ingredients, and carries out special conversion process in batch.

从那里，它转移到一个合适的直径里面。通过循环流化床，从而降低转换材料的含水率，一般是小于1%，而且可以间歇干燥，等排入双层振动筛分离器的时候，可以去除结块，该分离器排出的产品是散装袋率达到2000磅/小时（907公斤/小时）。

   from there, it shifts to a suitable diameter. Through circulating fluidized bed, the moisture content of conversion material is generally less than 1%, and it can be dried intermittently. When discharged into the separator of double-layer vibrating screen, caking can be removed. The product discharged from the separator is bulk bag with a rate of 2000 lb / h (907 kg / h).

同时载体和填料的增加，可以增加集聚产生的活性成分比例，所以监控团块尺寸材料是必须的，而且检测是否有任何变化过程，影响活性成分的分布。

   at the same time, the increase of carriers and fillers can increase the proportion of active components produced by agglomeration, so it is necessary to monitor the size of agglomerates and detect whether there is any change process that affects the distribution of active ingredients.

因为干燥机筛选部分的整体过程离线，也可用于干燥含有过量的水分的原料或干燥由该公司生产的其他大宗产品，在广泛应用的干预期，系统被设计是温度高于所需专有的化学操作。

   because the overall process of the screening section of the dryer is offline, it can also be used to dry raw materials containing excessive moisture or other bulk products produced by the company. In the widely used dry expectation, the system is designed to have a temperature higher than the required proprietary chemical operation.