制氮机纯度提不上去是什么原因导致的呢？

生产过程中，常有客户反映制氮机纯度提不上去，那么您知道这是什么原因导致的呢？现在小编就这个问题为您解答：
In the production process, there are often customers who say that the purity of the nitrogen generator can not be improved. Do you know what causes this? Now the editor will answer this question for you
1、碳分子筛性能参数降低，因为制氮设备碳分子筛中毒了，碳分子筛吸咐工作能力降低。
1. Molecular sieves, because of the lower carbon adsorption capacity of molecular sieves.

说白了的制氮设备碳分子筛中毒了指的是因为应用生产厂家没能立即对气体去油除水系统软件进行维护保养，造成油渍进到制氮设备吸咐塔內部，油渍会阻塞碳分子筛吸咐腔而没法吸咐氧原子，因此 终从蒸汽流量计出去的N2中会出现氧含量高的状况。
The carbon molecular sieve poisoning of nitrogen production equipment refers to the fact that the application manufacturer fails to immediately maintain the software of the gas oil and water removal system, causing oil stains to enter into the absorption tower of the nitrogen generation equipment. The oil stains will block the carbon molecular sieve adsorption chamber and cannot absorb oxygen atoms. Therefore, the nitrogen from the steam flowmeter will eventually have high oxygen content.
此时使用人理应融合生产制造必须立即对空气滤清和全自动过滤阀、去油活性碳进行拆换，关键的是拆换制氮设备吸收剂，便可修复到一切正常制氮工作能力。，必须对制氮设备维修提升N2纯净度。
At this time, the user should integrate production and manufacturing, and must immediately remove and replace the air filter, automatic filter valve and deoiling activated carbon. The key is to replace the absorbent of nitrogen generation equipment, so that all normal nitrogen production capacity can be restored. It is necessary to improve the purity of N2 for nitrogen generation equipment maintenance.
2、空气压缩机气量不够，或工作压力不足。气体供给量不足造成进供气量低于需要的N2指标值，会造成出入口N2纯净度不足。
2. The air compressor has insufficient air volume or working pressure. The insufficient gas supply will cause the inlet gas supply to be lower than the required N2 index value, which will result in insufficient N2 purity at the inlet and outlet.
更多关于制氮机的精彩资讯，敬请关注网址https://www.sdqyjn.com
For more information about nitrogen generator, please pay attention to the website https://www.sdqyjn.com