公司新闻

当前位置:首页 > 新闻中心 > 公司新闻

空压机节能改造说说如何使用余热回收的热水

来源:https://www.sdqyjn.com/   日期:2021-01-25   浏览量:0
TAG:山东制氮机,山东干燥机,山东螺杆鼓风机,山东空压机,山东自动排水器

空压机节能改造认为空压机余热回收是非常有必要的,但是在余热回收过程中会产生热水,那么这些热水应该如何处理使用呢?空压机节能改造厂家总结了几点用法,我们来看一下吧。

Air compressor energy saving transformation that air compressor waste heat recovery is very necessary, but in the process of waste heat recovery will produce hot water, so how should these hot water be used? Air compressor energy saving transformation manufacturers summed up a few usage, let's take a look at it.

1、在机械加工时往往需要高温热水加上脱脂剂来对零配件进行清洗,空压机节能改造厂家认为脱脂的热水温度要求一般50-70度就可以了,而空压机热能回收所烧的热水正好满足这个需求,因为空压机在运行过程中的油温将达到80-100度,我们把这个油温转换成热能来烧热水温度可达到70度左右。所以空压机节能改造厂家认为把空压机热水器回收的热水来用做洗清零件是再合适不过的。

20210125644523.jpg

1. In mechanical processing, high temperature hot water and degreasing agent are often needed to clean the spare parts. The manufacturer of air compressor energy-saving transformation thinks that the degreasing hot water temperature is generally 50-70 degrees, and the hot water burned by air compressor heat recovery just meets this demand, because the oil temperature of air compressor in the operation process will reach 80-100 degrees, we convert the oil temperature into heat energy The temperature of hot water can reach about 70 ℃. Therefore, the air compressor energy-saving transformation manufacturers think that it is more appropriate to use the hot water recycled from the air compressor water heater as cleaning parts.

2、还可以做为烘干零件的作用,空压机节能改造厂家介绍空压机热能利用的热能可以用水或者其它导热体进行较远距离的输送,大多数金属零件都是油铁碳钢或者是高速钢等材质做的,这些材质遇水后很容易生锈,所以在清洗过后,需要马上进行烘干处理,烘干过后再进行包装或者进行下一步工艺加工处理,这样才能保证零件的干净、干燥,不生锈。

2. It can also be used as the role of drying parts. The air compressor energy-saving transformation manufacturers introduce that the heat energy used by the air compressor can be transported by water or other heat conductors for a long distance. Most metal parts are made of oil, iron, carbon steel or high-speed steel. These materials are easy to rust when they meet with water, so after cleaning, they need to be dried immediately After packaging or the next step of processing, in order to ensure that the parts clean, dry, no rust.

本文有山东空压机的小编的介绍的,更多精彩内容可以关注:https://www.sdqyjn.com里面会有更加详细的内容介绍,希望可以帮助到大家。

This article has the introduction of Shandong air compressor, more wonderful content can pay attention to: https://www.sdqyjn.com There will be more detailed content, I hope to help you.


上一篇:螺杆鼓风机漏油故障是由哪些原因造成的呢?
下一篇:空压机对于激光切割机的重要性