公司新闻

当前位置:首页 > 新闻中心 > 公司新闻

螺杆鼓风机漏油故障是由哪些原因造成的呢?

来源:https://www.sdqyjn.com/   日期:2021-01-21   浏览量:0
TAG:山东制氮机,山东干燥机,山东螺杆鼓风机,山东空压机,山东自动排水器

螺杆鼓风机漏油故障原因及解决措施罗茨风机因为质量不合格或者检测存有较大误差,就会引起鼓风机的一些故障问题,螺杆鼓风机漏油故障是由哪些原因造成的呢?

Screw blower oil leakage fault causes and solutions roots blower because the quality is not up to standard or there is a large error detection, it will cause some problems of the blower, screw blower oil leakage fault is caused by what reasons?

1、鼓风机存有污物

  1. There is dirt in the blower

    20210121498333.jpg

叶轮上如果存有较多杂质,形成风机间隙太小,就会影响风机的正常运转,风机的排气不畅、螺杆鼓风机振动过度都会影响到风机整体结构的紧凑度,长期下去就会有可能造成漏油的情况。

If there are many impurities on the impeller, the fan clearance will be too small, which will affect the normal operation of the fan. The poor exhaust of the fan and excessive vibration of the screw blower will affect the compactness of the overall structure of the fan, which may cause oil leakage in the long run.

2、人为注入太多润滑油

2. Too much lubricating oil is artificially injected

我们在注入润滑油时,一定要按照标准进行注入,避免注入过多的润滑油。

When we inject lubricating oil, we must inject it according to the standard to avoid injecting too much lubricating oil.

3、油箱端盖加工不合格

3. The end cover of oil tank is not qualified

油箱质量问题导致油箱出现裂缝,或者一些外力的原因导致有限的破损,亦会导致罗茨风机漏油情况的发生。

Oil tank quality problems lead to cracks in the oil tank, or limited damage caused by some external forces, which will also lead to oil leakage of Roots blower.

4、轴承磨损过度

4. Excessive bearing wear

轴承磨损过度,导致游隙增大,产生漏油的情况发生。

The excessive wear of the bearing results in the increase of the clearance and oil leakage.

螺杆鼓风机漏油情况还有一些其他原因,主要原因大多为:螺杆鼓风机产品质量问题及不科学操作导致的。如果需要了解更多的精彩内容可以点击:https://www.sdqyjn.com

There are some other reasons for the oil leakage of screw blower, most of which are caused by product quality problems and unscientific operation of screw blower. If you need to know more about the wonderful content, you can click: https://www.sdqyjn.com


上一篇:螺杆鼓风机与空气悬浮离心鼓风机的对比
下一篇:空压机节能改造说说如何使用余热回收的热水