行业新闻

当前位置:首页 > 新闻中心 > 行业新闻

教你三招对付空气自动排水器里的积水!

来源:https://www.sdqyjn.com/   日期:2021-01-29   浏览量:0
TAG:山东制氮机,山东干燥机,山东螺杆鼓风机,山东空压机,山东自动排水器

压缩空气自动排水器有水这个情况,这一种现象是很正常的,了解储气罐起的作用和工作原理,要知道在机器的运转过程中,它能给我们空压机提供缓冲的空间,减小脉冲,稳定电压,机器也因为它的一个缓冲而不必重复启动,减少耗电量。接下来厂家小编为大家解答空压机储气罐有水的三大处理方法。

The compressed air automatic drainer has water. This phenomenon is very normal. Understand the function and working principle of the air tank. In the process of machine operation, it can provide buffer space for our air compressor, reduce the pulse and stabilize the voltage. Because the machine is a buffer, it does not have to start repeatedly to reduce power consumption. Next, the small manufacturers for you to answer the air compressor storage tank water three treatment methods.

20210129312897.jpg

空压机压缩后的气体有一部分被存储在储气罐中,而空气里是含有大量的水分子,当这些高速运动的水分子碰到储气罐壁时,会凝结成水,经过一段时间的积累,底部会出现大量的水。

Part of the compressed air is stored in the air tank, and the air contains a lot of water molecules. When these high-speed water molecules touch the air tank wall, they will condense into water. After a period of accumulation, a lot of water will appear at the bottom.

通过工作原理我们可以知道,储气罐中有水是正常现象,接下来就是如何处理这些水的问题,形成的水我们需要及时的排出,因为它不仅仅影响空气质量,还会锈蚀掉容器。在这里介绍下处理这些水的三种方法:

Through the working principle, we can know that there is water in the air tank is a normal phenomenon. The next step is how to deal with the problem of water. We need to discharge the water in time, because it not only affects the air quality, but also corrodes the container. Here are three ways to treat the water

1、可以在储器罐安装一个气水分离器,将压缩空气中的气水分离。

1. A gas water separator can be installed in the storage tank to separate the gas and water in the compressed air.

2、在排污口处安装一个自动排水器,对这个自动排水器的选择也是有要求的,低劣排水器很容易堵塞。

2. An automatic drainer is installed at the sewage outlet, and the selection of the automatic drainer is also required. The inferior drainer is easy to block.

3、管路设计是否合理,压缩空气管路一般要求倾斜1度左右,从系统管线进入的话是进储气罐的管路接口道的上方,做一个做一个一百八十度的弯脖向下在接到储气罐进口即可。

3. Whether the pipeline design is reasonable or not, the compressed air pipeline is generally required to be inclined about 1 degree. If it enters from the system pipeline, it is better to make a 180 degree bend neck above the pipeline interface of the air storage tank and connect it to the inlet of the air storage tank.

以上就是三种关于自动排水器有积水的情况的处理方式,希望可以帮助到大家,更多精彩的内容请关注:https://www.sdqyjn.com

The above are three ways to deal with the water accumulation in the automatic drainer. I hope it can help you https://www.sdqyjn.com


上一篇:在使用自动排水器时应注意什么?
下一篇:如何合理控制干燥机设备中的氧气