零气耗自动排水器真的吗？

大多数情况下，冷凝液中含有油以及固体颗粒物杂质。如果不及时的将压缩空气冷凝液排出输送和应用设备之外，这些杂质将会扩散到整个压缩空气系统中，导致工作运转出现问题，并进而使生产成本增加和损害生产设备与产品。而后处理设备重要的职责就是除去压缩空气中的污染物和水。泄露和控制不到位是后处理系统造成能耗浪费的主要原因。

In most cases, the condensate contains oil and solid particles. If the compressed air condensate is not discharged from the conveying and application equipment in time, these impurities will diffuse into the whole compressed air system, leading to problems in operation, and then increase the production cost and damage the production equipment and products. The important duty of post-treatment equipment is to remove pollutants and water in compressed air. Leakage and poor control are the main causes of energy waste in the post-processing system.

如果一个浮球排水阀因为故障造成无法复位而开始产生泄漏，根据其排污孔径和一般工作压力进行测算，这还不包括设备维护修理所带来的间接费用。我们以往在使用定时器控制排放电磁阀时，同样也会出现压缩空气损失。

If a floating ball drain valve can not be reset due to failure and begins to leak, it is estimated according to its blowdown hole diameter and general working pressure, which does not include the indirect cost of equipment maintenance and repair. In the past, when we used the timer to control the discharge solenoid valve, the compressed air loss also occurred.因为定时器电磁排污阀采用死板僵化的定时工作方式，而不能根据冷凝液积存的实际数量控制排放的间隔时间和每次开闭阀门的精 准时机进行有用排放。当每次排污阀过多频次或过长时间打开时，很多昂贵且未经使用的压缩空气就立即被白白的泄漏到环境中去，特别在寒冷干燥的季节，这种情况造成的能耗浪费尤为严重。

Because the timer solenoid blowdown valve adopts the rigid timing working mode, it can not control the interval time of discharge and the precise time of opening and closing the valve for useful discharge according to the actual amount of condensate accumulation. When the blowdown valve is opened too often or too long, a lot of expensive and unused compressed air will be immediately leaked to the environment, especially in the cold and dry season.

因为，冷凝液并不是有规律地产生和积聚。而是随着气候，季节，环境温度和湿度，每天的工作时段以及压缩机的加卸载转换与满载率等因素而随时发生着变化。只有准确实时地对冷凝液进行排放才能避免不必要的能耗浪费和损害。采用电子液位控制的高品质的零气耗自动冷凝液排水器正是通过电容式液位传感器实现了这个目的。

Because condensate is not produced and accumulated regularly. But with the climate, season, environmental temperature and humidity, daily working hours and compressor load and unload conversion and full load rate and other factors change at any time. Only when the condensate is discharged accurately and in real time, the unnecessary energy consumption and damage can be avoided. The high quality zero gas consumption automatic condensate drainer with electronic liquid level control achieves this goal through capacitive liquid level sensor.

智能液位电子控制系统有用的避免了压缩空气的损失，做到冷凝液的及时排放，并保证了小化输入电能的需求。与计时器控制电磁阀相比，通常半年之内就可收回在此设备上的投资。这不仅节约能源和降低生产成本，还能间接有用的减少对全球环境二氧化碳的排放（产生于能源产生过程中）——是一个对用户成本控制和环境保护双赢的选择。

The intelligent liquid level electronic control system can effectively avoid the loss of compressed air, achieve the timely discharge of condensate, and ensure the demand of small input power. Compared with the timer control solenoid valve, the investment in this equipment can be recovered within half a year. This not only saves energy and reduces production costs, but also indirectly and usefully reduces the global environmental carbon dioxide emissions (generated in the process of energy generation) - it is a win-win choice for user cost control and environmental protection.

在压缩空气产生和处理过程中，应该针对用户和服务商特定的应用和当下省电，降耗减排，提效增收等需求提供佳设计制造的配套设备。采用液位控制技术的压缩空气零损耗压缩空气系统冷凝液排除器无疑是目前理想的选择。

In the process of compressed air generation and treatment, we should provide well-designed and manufactured supporting equipment for the specific application of users and service providers and the current needs of energy saving, energy saving, emission reduction, efficiency and income increase. The condensate eliminator of compressed air system with zero loss and energy saving using liquid level control technology is undoubtedly the ideal choice at present.